6
©
2001 Directed Electronics, Inc.
Using Your System
Pressing for one second will lock the doors and activate the
Failsafe
®
Starter Kill. The red LED will begin flashing once per
second and the parking lights will flash once. Pressing again
within 10 seconds of locking/arming the system will not lock the
doors again, but it will flash the parking lights and honk the horn
once, confirming that the system is locked/armed. After 10
seconds, the system can be locked/armed again, as usual.
Locking/arming your system protects your vehicle in the
following ways:
■ The vehicle doors will lock.
■ If the Security Features have been programmed on by the
installer, then turning on the ignition will initiate the Panic
Mode, and the Failsafe
®
Starter Kill will prevent the vehicle’s
starter from cranking. (See the Programming Options section of
this guide for details on the Security Features.)
NOTE: You must use your transmitter to lock the vehicle in order for the
starter kill to be armed. Manually locking the vehicle does not arm the
system; it will only lock the doors.
To unlock the driver’s door (or all vehicles doors, depending on if
your vehicle has driver’s door unlock) and disarm the Failsafe
®
Unlocking/Disarming
Locking/Arming
Comentarios a estos manuales