Avital MAXX2 Guía de instalación descargar pdf (Pagina 10)

System Status/Diagnostic Charts

LED Status

Off System is disarmed.

On In Valet mode.

Double Flash System is armed.

Triple Flash More than three consecutive incorrect Valet

codes have been entered (system ignores

Valet switch for two minutes).

Flashing in Cycles See "Specific Zone Intrusion Identification"

chart below.

Rapid Flash Passive arming countdown.

If the alarm has been triggered, the siren will chirp three times upon remote disarm. Turn the ignition ON and

count the LED flashes. Each flash cycle is repeated two more times giving three cycles in total.

LED Zone Input Description

Three Flashes Optional Sensor 2 Dual Zone 4-pin

Four Flashes Door Trigger Input (-) P2 Pin 8 GREEN

Five Flashes Boot/Bonnet Trigger P2 Pin 2 BLUE/WHITE or Pin 7 BLUE

Six Flashes Normally Closed Trigger Input (-) P2 Pin 4 BLACK/WHITE

Seven Flashes Ultrasonic Sensor P1 Pin7/8/9 Ultrasonic sensors

Eight Flashes Ignition Trigger P2 Pin 3 BLACK with ORANGE Tab

Specific Zone Intrusion Identification

LED System Status Indicator

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sin comentarios

Avital MAXX2 Guía de instalación Pagina 10