Avital MAXX2 Guía de instalación descargar pdf (Pagina 6)

Pin Connector Charts

Pin Number Wire Colour Description

1 WHITE/BLUE Channel 4 Accessory (-) Pulsed or Timed Output

2 PINK/BLACK Second Stage Unlock (-) Output

3 VIOLET/WHITE Arm/Disarm (-) Output (300mA maximum)

4 GREY/BLACK Channel 5 Accessory (-) Pulsed or Latched Output

5 BROWN Coded Link for Siren

6 RED/WHITE Channel 2 Accessory (-) Pulsed for Boot Release

8 Pre-Wired to Ultrasonic Sensors

10 WHITE Indicator Light Output

11 BLACK with WHITE TAG Indicator Light Polarity (+) or (-) Input Select

12 WHITE Indicator Light Output

13 BLUE/BLACK Unlock Common

14 VIOLET Unlock Normally Open

15 BROWN/BLACK Unlock Normally Closed

16 WHITE/BLACK Lock Normally Closed

17 VIOLET/BLACK Lock Normally Open

18 GREEN/BLACK Lock Common

WHITE/BLUE Channel 4 Accessory (-) Output (P1/1)

CAUTION: Do not use this output to roll-up windows on vehicles not equipped with "Total-close."

The WHITE/BLUE wire can be programmed to provide a (-) output from one second to two minutes. The wire can

also be programmed to automatically activate when the alarm system is armed. This output can be used to acti-

vate headlights, roll-up/down windows and close sunroofs on vehicles equipped with factory "Total-close."

PINK/BLACK Second Stage Unlock (-) Output (P1/2)

The alarm has onboard relays to lock and unlock the doors. It also incorporates a PINK/BLACK (-) output wire

that will allow the customer to operate a Two-Stage Unlock feature. The second stage unlock wire provides a 400

mA, 0.75 second (-) output when activated.

CAUTION: Ask the customer at the time of installation whether they require this feature. Verify the

type of central locking system the vehicle has. Carefully follow the door lock/unlock diagrams on

pages 12-16.

18-Pin Connector (P1)

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Sin comentarios

Avital MAXX2 Guía de instalación Pagina 6